The 2nd generation of Geekvape Aegis Legend Kit - Geekvape L200 (Aegis Legend 2) kit released already. Geekvape L200 (Aegis Legend 2) leaps with pride and honor. Like all the Aegis devices, the Geekvape L200 (Aegis Legend 2) looks and feels durable. There're some differences and similarities exist indeed. Now, let's find it out!
Geekvape Aegis Legend Kit (2018)
Geekvape Aegis L200 (Aegis Legend 2 ) Kit (2021)
|Weight||340g (Mod:201.2g)||213.3g (Mod:143.3g)|
|Tank (Size)||25mm*45mm(Aero tank)/25mm*51mm(Alpha tank)||Z sub Ohm Tank 2021|
|Airflow Adjustable||Bottom||Top and top-to-bottom|
|Battery type||External dual battery 18650||External double battery 18650|
|Charging Port||USB||Type C|
|Display Screen||0.91-inch OLED full-color display||1.08 inch, TFT color screen|
IP67 Waterproof, Dustproof ，Shockproof
IP68 Waterproof, Dustproof ，Shockproof
|Dislike||Battery door is a little hard to close||
Fix problem:Battery door is a little hard to close
After three years, what`s the difference between Geekvape L200 (Aegis Legend 2) and Geekvape Aegis Legend ?
1. Geekvape L200 (Aegis Legend 2) is 15% smaller and 30% lighter than Aegis Legend. When you hold the new legend, you will know how compact and comfortable it is in your hand.
2. New A-Lock makes Geekvape L200 (Aegis Legend 2) safer to carry. The lock protects you from over-burnt coil or overheating by accidental press. Whenever you want to vape, just take it out, swipe it up and enjoy!
3. Geekvape L200 (Aegis Legend 2) New tri-proof makes the mod goes to another high level, from IP67 to IP68 rating water-resistance and dust-resistance.It is more durable right now with higher level of shock-resistance.
4. Geekvape L200 (Aegis Legend 2) 1.08-inch full screen maxes out vape experience with a new interaction via new UI coming along.
5. Geekvape L200 (Aegis Legend 2) using Type C, not USB;Charging port with flipping cover, easier to fuel your vape.
6. Wide Working Temperature Range of Geekvape L200 (Aegis Legend 2). No matter exposed to cold or hot temperatures, down from -20°C or up to 50 °C, the new legend is still at your service.
7. Geekvape L200 (Aegis Legend 2) fixed problem:Battery door is a little hard to close
8. Geekvape L200 (Aegis Legend 2) has a larger Air Slots
9. Airflow Adjustable and Fill Liquid is different between 2 matching tanks,Geekvape Z Sub-ohm Tank 2021, the best leakproof tank so far.
The adjustments for the device are as follows:
*Five clicks of the fire button turn the device on/off
*Three clicks of the fire button to enter settings mode
*One click of the fire button in settings mode moves the cursor to select parameters
*Up and down to change parameters
*Long press the fire button to exit settings mode
*Up and down to change wattage or temperature
*Up and down at the same time to lock the screen
*Fire and down at the same time to decrease brightness
*Fire and up at the same time to increase brightness
*Fire and up and down at the same time for stealth
*Three clicks of the fire button then hold both up and down to change color
INSTRUCTIONS of Geekvape Aegis Legend 2 Kit
Prompts: ①Anti-reverse battery protection. (Reverse battery connection does not damage chip) ②While the resistance of tank≤0.08ohm, the device prompts short circuit for 2s. ③While the resistance of tank≥3.5ohm, the device prompts high resistance for 2s.④Single battery voltage < 3.2v before use or < 2.8v during use, the device will stop output automatically and prompt low voltage for 2s.⑤When the temperature of circuit board >65*C before use or >85°C during use, the device prompts high temperature for 2s.⑥No atomizer: press the fire button, the device prompts no atomizer for 2s.⑦Single output is over 10s timeout, the device stops output and prompts timeout for 2s.⑧In the locked state, press the "+" or“-”button to adjust the Parameters, the device prompts screen lock for 2s.
Resistance lock: When the cursor is toggle to the resistance value of coil, press the "-" button to lock/unlock the resistance value, press the "_" button to update resistance value and unlock.
New atomizer: ①In the standby interface, it will monitor whether the atomizer is replaced and update the latest atomizer resistance. ②When a new atomizer is inserted, the screen will jump to the interface for selecting new and old atomizer and prompt the user to select new and old atomizer.③Click the"+" key to select the new atomizer, and click the "_" key to select the old atomizer. ④When the original atomizer is removed, the resistance value will be automatically cleared.
Bypass mode: The constant output voltage is 4.15V. The power does not exceed 200W.