pnp coils

voopoo pnp coils

Voopoo’s PnP coils get their name from the simplicity behind the design. “Plug ‘n’ Play” is the description used by Voopoo for their simple press-fit application for installing their coils which in turn eliminates the chance of threaded connection that you may have unfortunately experienced in the past with other coils.

This adaption has led to less leaking issues or poor connections with their PnP coils relying on their press-fit application with a sealed silicone O-ring to make both the installation and removal of their coils a breeze.

Whether you prefer to vape Direct to Lung (DTL) or Mouth to Lung (MTL), mesh or multi-wrapped, higher wattage or lower, the PnP coil series offers a full range of options for pretty much any vaper.

Voopoo PnP Coils Guide

Let`s check PnP coil options!

PnP-VM1

With a mesh coil design at 0.3ohms, the PnP-VM1 comes with recommended wattage between 32-40W. Making its first appearance with the launch of the Vinci Pod Mod kit, the PnP-VM1 is a great DTL coil option which creates decent tasting flavour with satisfactory vapour production.

 

PnP-VM3

Also with mesh coil design at 0.45ohms, the PnP-VM3 comes with recommended wattage between 25-35W. Yet another great DTL coil option with great flavour with little vapour production. Thanks to its even heat distribution throughout its mesh coil design, the PnP-VM3 remains stable and consistent throughout its lifespan.

 

PnP-VM4

At 0.6ohm with mesh coil build, the PnP-VM4 comes with recommended wattage between 20-28W. Stepping up from the previous this PnP coil provides a full MTL vape or a restricted DTL vape depending on airflow settings. Thanks to its newly designed multi mesh configuration the PnP-VM4 provides excellent flavour and vapour production.

 

PnP-VM5

Also designed with a mesh coil design at 0.2ohm, the PnP-VM5 comes with recommended wattage between 40-60W. This coil is the entry point for a great DTL vape. Pair the PnP-VM5 coil with the PnP pod tank and utilise as a refillable pod or go further with the PnP 510 connector to harness the highest potential the coil can provide for excellent flavour and cloud production!

 

PnP-VM6

With mesh coil design at 0.15ohm, the PnP VM6 comes with recommended wattage between 60-80W. The next step up from the PnP-VM5; The PnP-VM6 coil is a noticeably increase on performance and creates great tasting flavour with extensive vapour production through a mouth-watering DTL vape. Perfectly pair the PnP-VM6 with the Drag X Pod Kit for a delightful vaping combination.

 

PnP-R1 

With a dual coil design at 0.8ohm, the PnP-R1 comes with recommended wattage between 12-18W. The round wire configuration on this coil creates excellent heat distribution to create an all-round satisfying MTL vaping experience.

PnP-R2

Also with a dual coil design at 1.0ohm, the PnP-R2 comes with recommended wattage between 10-15W. With similar capabilities and design to that of the PnP-R1, you can expect a slight increase in flavour with the PnP-R2 although that will come with a slight decrease in vapour production.

 

PnP-M2

With a single coil build at 0.6ohm, the PnP-M2 comes with recommended wattage between 20-28W. With single mesh coil design, you can expect consistent strong flavour profiles throughout the lifespan of the PnP-M2 coil from Voopoo.


PnP-TM1 Mesh Coil

With a mesh coil design at 0.6ohm, the PnP TM1 comes with recommended wattage between 20-25W. One of the newest entries to the PnP coil series, the PnP-TM1 is aimed towards nic salt e-liquids and creates a pleasant MTL vaping experience. The PnP-TM1 is compatible with a wide range of products although best with pod kits designed around salt nic usage such as the Argus Air pod kit


PnP-TM2

With a single mesh coil design at 0.8ohm, the PnP-TM2 comes with recommended wattage between 12-18W. With similar capabilities and design to that of the PnP-TM1, you can expect to see an increase in flavour quality with the PnP-TM2 although that will come with a slight decrease in vapour production overall but nothing major.


PnP-TR1 Mesh Coil

With mesh coil design at 1.2ohm, the PnP-TR1 comes with recommended wattage between 10-15W. The PnP-TR1 is one of the most recent editions to the PnP coil series and is recommended to be used with nic salts much like the PnP-TM1 and PnP-TM2. Pair this coil perfectly with the latest Voopoo Argus Pod Kit for excellent all-round flavour and cloud production.



PnP-RBA

With a postless build deck and single coil configuration, the PnP-RBA is compatible with most devices including the Vinci Pod Mod,Vinci X, Drag S,Drag XArgus Pod Kit and more!


If building is your style, the PnP is a great addition to utilise with your PnP Pod tank to get your coil to your preferred setting, although there is such a wide range already available within the PnP series there isn’t much requirement to go down this route unless determined.

 

Voopoo PnP Coils

Voopoo PNP RBA Coil

VOOPOO PnP Pods 

VOOPOO TPP Mesh Coils

VOOPOO TPP Pod Tank